Dell 3110CN Owner's Manual page 36

On the Printer Software screen, specify the software that you want to install and installation
9.
path, and then click Next. At this point, the wireless setting specified on the Enter Wireless
Network Settings screen is sent to the printer.
On the Wireless configuration is now complete screen, change the wireless setting of your
10.
computer to the same as that sent to the printer, and then click Next.
Select Network Connections from Control Panel.
a.
Right-click Wireless Network Connection and select Properties.
b.
Select the Wireless Network tab.
c.
Click Advanced.
d.
Do either of the following:
e.
When wireless ad-hoc mode is set to the printer:
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog
box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Select the setting that you send to the printer in the list in Preferred Network group.
f.
Click Move up to move the setting to the top of the list.
g.
Click OK to close the Property dialog box.
h.
On the Setting-Ready Printer screen, verify that the correct IP address is assigned to the
11.
printer to which the wireless setting is set, and then click Install.
If you select the I am setting up this printer on server check box on the Select Printer screen
12.
and also select the PostScript Driver check box on the Enter Printer Settings screen, the
Adobe Systems Inc. License Agreement screen appears. Select the I accept the terms of the
license agreement option button, and then click Install.
On the Congratulations! screen, click Finish to complete the installation. A test page will be
13.
printed with the installed printer by clicking the Print Test Page button.
Scene 2. Construct new wireless network environment for both computer and printer (When wireless
setting needs to be set to your computer)
Insert the
1.
NOTE:
is the drive letter of your CD), and then click OK.
Select the Network Installation option button, and then click Next.
2.
Select the Configure Wireless Printer using a wireless connection (Advanced) option
3.
button, and then click Next.
36
Setting up Network Printing
Drivers and Utilities
If the CD does not automatically launch, click Start → Run, and then type D:\setup.exe (where D
CD into your computer to launch the installation software.