Step 1: Basic Recorder Connections; Connecting The Antenna Cables - Philips DVDR3360H User Manual

CABLE
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes using this
recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that these
devices are turned on in order to watch
or record the cable programmes.
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see the chapter "Step 2 : Optional
Connections" for the possible
connections to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.

Step 1: Basic Recorder Connections

ANTENNA
SATELLITE
A
AN-
TENNA
EXT 2
TV
EXT 1
B
VIDEO
(CVBS)
S-VIDEO
AUX - I/O
(Y/C)
L
AUDIO
R
TO TV - I/O
AUDIO / VIDEO OUT
A
Connect the existing Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver {RF OUT or TO TV}) to the
ANTENNA socket on the recorder.
B
Use the supplied RF coaxial cable to
connect the TV
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
Helpful Hint:
– Depending on how you have currently
connected your TV (directly from an
off-air antenna or Cable box or VCR), you
will have to disconnect some of the cables
before you make the above connection.
COAXIAL
DIGITAL AUDIO OUT
TV
socket on the
15