Adjusting The Doors - Samsung RF62QEPN User Manual

INSTAllATION OF ThE
hANdlES
REF handle installation
1. Make sure the word "UP" on the rear of the
handle is facing right side up.
2. a. Match the upper and lower handle Locking
Tabs on the doors to the handles.
b. Fix the handles to the doors by sliding them
down firmly until you hear a click sound.
3. Check the installation of the handles by pulling on
them. If the handles have been inserted correctly,
they should not move. Ensure the two handles
are horizontally aligned.
• If the REF handles are not aligned, repeat number
2. To align the doos, refer to the owner's manual,
section 'Leveling the refrigerator'
FRE handle installation (Drawer-Type)
1. Make sure the word "The Upper Direction" on the
side of the handle if facing up.
2. a. Align the handle with the mounting studs.
b. Push the handle onto the mounting studs until
you hear a click.
3. Check the installation of the handle by pulling
on it. If the handle has been inserted correctly, it
should not move.
• If the Freezer handle is not attached, repeat step
2.
• Swing-Type Model does not include FRE handle.

AdjUSTING ThE dOORS

After putting the doors back on the Refrigerator,
make sure the Refrigerator is level so that you can
make final adjustments.
If the Refrigerator is not level, it will not be possible
to get the doors perfectly even.
Also it is possible to sweat in the refrigerator and ask
more energy bills.
For example, when the left side is lower than the
right side, insert a flat-blade screwdriver into a notch
on the left control lever, and turn it clockwise or
counter clockwise to level the door.
Turning it clockwise to raise the refrigerator and
counterclockwise to lower it.
For the left side is higher, do it with right lever.
Both control levers must be surely touching
the floor to avoid the possible personal injury
CAUTION
or property damage because of tipping.
When the left
side is lower.
Control lever
Screwdriver(-)
When the left
side is higher.
Screwdriver(-)
setting up _13 setting up _13