Heating Elements - GE Profile PP945 Technical Service Manual

Heating Elements

The radiant heating element consists of a ribbon-
type resistance wire attached to the support
insulation with molded ceramic walls in a corrosion-
protected metal dish. On model PP975, the circular
heating elements come in 5 sizes.
Single Element
Tri-Ring Element
On model PP945, the circular heating elements
come in 3 sizes.
Single Element
Tri-Ring Element
Dual Element
Dual Element
6-in. Warmer
Dual Element
– 18 –
To remove heating elements:
1. Remove the glass top. (See
2. Mark and remove the wires to the element.
3. Lift the element off the springs.
Note: When installing the new heating element,
make sure the 2 springs are on the 2 posts.
.)
Glass Top
Post
Spring
(Continued next page)