Turning On The Projector; Turning Off The Projector; Selecting Source Mode - LG AN215 Owner's Manual

Installing and Composition

Turning on the Projector

1. Connect power cord correctly.
2. Press the POWER button on the remote control or control panel.
(Green operation indicator flashes during cooling of the lamp.)
An image will appear after the operation indicator light turns (Green).
Select the source mode with the SOURCE button.
* Don't unplug the power cord while the ventilation fan (inlet/outlet) is working. If so, you take longer time
by lamp on.

Turning off the Projector

1. Press the POWER button on the control panel or remote control.
Power off?
Please press Power key again.
2. Press the POWER button on the control panel or remote control again to cut off the power.
3. If the operation indicator LED is orange and blinking, do not disconnect the mains supply until the
operation indicator LED is lit up constantly (orange).
If the operation indicator LED is orange and blinking, the power button on the control panel or on the remote
control will not operate.

Selecting source mode

1. Press the SOURCE button.
Select
RGB
F
2. Each press of the , button changes the display as below.
F G
RGB
Component
22
OK
G
S-Video
HDMI
Video