Lincoln MKT Owner's Manual page 144

B
• Raise: Pull up on the head restraint (A).
• Lower: Press and hold the guide sleeve adjust and release button (C)
and push down on the head restraint (A).
• Remove: Pull up the head restraint until it reaches the highest
adjustment position and then press and hold both the adjust and
release button (C) and the unlock and remove button (D), then pull
up on the head restraint.
• Reinstall: Align the steel stems into the guide sleeves and push the
head restraint down until it locks.
A
C
C. Guide sleeve unlock and remove buttons
To reinstall the non-adjustable head restraint, do the following:
• Remove: Pull up the head restraint until it reaches the highest
adjustment position and then press and hold the guide sleeve unlock
and remove buttons, then pull up on the head restraint.
• Reinstall: Align the steel stems into the guide sleeves and push the
head restraint down until it locks.
2014 MKT (mkt)
Owners Guide gf, 1st Printing, April 2013
USA (fus)
Seats
Second row center seat head
restraint (if equipped)
D
The head restraints consist of:
A. Energy absorbing head restraint
A
B. Steel stems
B
C. Guide sleeve adjust and release
button
C
D. Guide sleeve unlock and remove
button
Second row outboard seat head
B
restraints
The outboard head restraints are
non-adjustable, but they can be
removed.
The non-adjustable head restraints
consists of:
A. Energy absorbing head restraint
B. Steel stems
143