Table of Contents
Advertisement
12
en | Connections
3
Connections
CAUTION!
Before proceeding, disconnect the power from the power
supply cable. Ensure that the voltage of the unit matches the
voltage and type of the power supply being used.
3.1
Power connection
3.1.1
Low voltage cameras
10 mm
Figure 3.1 Low voltage power connection
Connect power from a 24 VAC or 12 VDC class 2 power supply
as follows:
–
–
AM18-Q0603 | v1.0 | 2011.04
Use AWG16 to 22 stranded wire; cut back 10 mm (0.4 in)
of insulation.
Push in the tabs and insert the wires.
Note
These connections are not polarity sensitive.
Installation and Operation manual
Digital Color Camera
Bosch Security Systems
Advertisement
Table of Contents
