Install Firmware Release On Cisco Unified Communications Manager - Cisco 8961 Release Notes
For firmware release 9.3(2)sr1
Hide thumbs
Also See for 8961:
- Administration manual (378 pages) ,
- User manual (180 pages) ,
- Features (35 pages)
Table of Contents
Advertisement
Cisco Unified IP Phone 8961, 9951, and 9971 Release Notes for Firmware Release 9.3(2)SR1
All Cisco Unified Communications Manager servers in the cluster must support the phones. For information
about the minimum Cisco Unified Communications Manager software version that the phone requires, see
the introductory sections of these release notes.
For more information on Cisco Unified Communications Manager installations and upgrades, see the documents
for your Cisco Unified Communications Manager version at the following location:
en/US/products/sw/voicesw/ps556/prod_installation_guides_list.html
To download and install the Cisco Unified Communications Manager version, perform these steps.
Procedure
Step 1
Go to the following URL:
http://www.cisco.com/cisco/software/navigator.html?mdfid=268439621&catid=278875240
Step 2
Choose your Cisco Unified Communications Manager version.
Step 3
Choose the appropriate software type.
Step 4
Hover over the desired file. When the popup window displays, click the Readme link to open the readme file.
Step 5
Choose Download or Add to cart for the desired file.
Step 6
Use the instructions in the readme file to install the updated file on the Cisco Unified Communications Manager.
Install firmware release on Cisco Unified Communications Manager
Before using the Cisco Unified IP Phone Firmware Release 9.3(2)SR1 with Cisco Unified Communications
Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the
cluster.
Procedure
Step 1
Go to the following URL:
http://www.cisco.com/cisco/software/navigator.html?mdfid=268437892&flowid=5293
Step 2
Depending on your phone model, choose Cisco Unified IP Phones 8900 Series or Cisco Unified IP Phones
9900 Series.
Step 3
Choose your phone type.
Step 4
Choose Session Initiation Protocol (SIP) Software.
Step 5
In the Latest Releases folder, choose 9.3(2)SR1.
Step 6
Select one of the following firmware files, click the Download Now or Add to cart button, and follow the
prompts:
• cmterm-8961.9-3-2SR1-1.cop.sgn
• cmterm-9951.9-3-2SR1-1.cop.sgn
• cmterm-9971.9-3-2SR1-1.cop.sgn
Note
If you added the firmware file to the cart, click the Download Cart link when you are ready to
download the file.
Cisco Unified IP Phone 8961, 9951, and 9971 Release Notes for Firmware Release 9.3(2)SR1
Install firmware release on Cisco Unified Communications Manager
http://www.cisco.com/
3
Advertisement
Table of Contents
