Table of Contents
Advertisement
installation & connection
Adjusting the monitoring direction for the camera
(SND-1080/SNV-1080)
Tilting
❖ Adjusting the monitoring direction
You can adjust the camera direction only when the camera is fixed on the ceiling.
Then, turning the camera to the left or right is referred to as "Panning", while tilting the angle
is "Tilting". For panning, the panning limit is 177.5° for the clockwise, and 177.5° for the
counterclockwise, a total of 352° enabled; further rotation is stopped by the stopper.
- Adjust the panning angle so that the camera settles in the right horizontal position.
You can adjust the panning up to 177.5° in each one direction, and 177.5° in the
other direction, a total of 352°.
- Adjust the tilting angle so that the camera settles in the right vertical position. You can
adjust the tilting between 17° and 90°.
- The total rotation range is 351°. You can make adjustment in one direction up to
124°, and 227° in the other direction.
❖ Methods of adjustment
• The case of wall installation
① After mounting the camera on the wall, adjust the panning angle so that the camera
faces a desired direction when tilting.
② Adjust the Rotate position to fit the video to the screen borders.
③ Then, adjust the tilting angle so that the camera faces the monitoring direction.
• The case of ceiling installation
① After mounting the camera on the ceiling, adjust the panning angle according to
the monitoring direction. You should adjust the panning angle lest that the video be
displayed upside down on the monitor.
② Adjust the Rotate position to fit the video to the screen borders.
③ Then, adjust the tilting angle so that the camera faces the monitoring direction.
J
For smoother Rotate adjustment, set the Tilt position between 60° ~ 80°.
24_ installation & connection
Panning
Lens rotation
0˚
17˚ ~ 90˚
Advertisement
Table of Contents
