overview
Rear Side
Item
Micro SD Memory
Card Compartment
Audio terminal
Video Out Port
Reset Button
14_ overview
OUT
AUDIO
GND
ACT
LINK
ALARM
NETWORK
IN
Compartment for the Micro SD memory card.
AUDIO OUT
Terminal for audio output.
AUDIO IN
Terminal for audio input.
Analog video output port. (for installation)
Resets the camera settings to the default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
IN
VIDEO
RESET
DC12V
Description