Control Features - GE PROFILE PDE9900 Technical Service Manual

Throughout this manual, features and appearance may vary from your model.
PDW8900 Series
PDW9700 Series and PDW9900 Series
A B
NTI- ACTERIAL
C
OOKWARE
N
ORMAL
2
Control Settings
1
Status Indicator Lights
The Status display tells you what is happening while the dishwasher is in operation and may flash,
indicating a malfunction. The lights will come ON indicating the sequence of the dishwasher operation.
LOW DETERGENT Displayed when the SmartDispense needs to be refilled with liquid or gel automatic dishwasher
SANITIZED Displayed when cycle has met sanitization conditions.
2
Time Remaining Display
During operation, the display shows the minutes remaining until the cycle is complete. The display may
adjust the remaining time while the Sensing light is on. The time displayed at the start of each cycle may
change from the factory setting as the unit customizes itself to home use. During a delay start, the
display will show hours of time remaining until the cycle starts.

Control Features

1 6
3
S PEED C YCLE S INGLE R ACK W ASH
C C R O
HINA YCLE INSE NLY
P C
LASTIC YCLE
3
(Indicators vary by models)
detergent.
SENSING Displayed while the Clean Sensor
The dishwasher will adjust the selected cycle to achieve optimal performance.
WASHING Displayed during prewash, main wash and rinse periods.
DRYING Displayed during HEATED DRY.
CLEAN Displayed when a wash cycle is complete.
(on some models)
5 4
4
™ is measuring the amount of soil and temperature of water.
– 6 –
2
1 5
Smart Dispense
D
LOW DETERGENT RYING
S S
ENSING ANITIZED
W C
ASHING LEAN
6