Ervice - GE 2 2-9917 2-9917 User Manual

Problem
Battery will not hold a
charge or is fully charged
and the BAT LOW lights
BAT LOW light blinks
Memory Dialing
doesn't work
S

ERVICE

The FCC requires this product to be serviced only by the manufacturer or its
authorized service agents. In accordance with FCC requirements, changes or
modifications not expressly approved by Thomson Consumer Electronics could
void the user's authority to operate this product. For instructions on how to obtain
service, refer to the warranty included in this Guide.
Attach your sales receipt to the booklet for future reference or jot down the date
this product was purchased or received as a gift. This information will be valuable
if service should be required during the warranty period.
Purchase date ________________
Solution
• Be sure you are sufficiently charging the battery. When the
battery has been charged for 12 hours, you can expect
approximately 4 hours of talk time.
• Check to be sure battery contacts on both the Handset and
the base are making contact and are clean; free of dirt or lint.
• When the Handset is placed in the base, check that the base
CHARGE/IN USE light is on.
• Place Handset in base for 10 seconds to reset the phone. If
that doesn't work, charge battery for 12 hours.
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure TONE/PULSE switch is correctly set.
Name of store ___________________________
15