Using Windows Xp - D-Link DIR-655 User Manual

Section 4 - Connecting to a Wireless Network
Using Windows XP
®
Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you
are using another company's utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most
utilities will have a "site survey" option similar to the Windows XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the center of the
bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower right corner
next to the time). Select View Available Wireless Networks.
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check you TCP/IP settings
for your wireless adapter. Refer to the Networking Basics section in this manual
for more information.
D-Link DIR-655 User Manual 98