Method B: Use Wps For Wireless Setup - NETGEAR XAVN2001 User Manual

Method B: Use WPS for Wireless Setup

If your wireless router or gateway has a WPS (Wi-Fi Protected Setup) button, you can use
this method for wireless setup. The WPS button might be labeled WPS or it could look similar
to or .
To use the WPS button on your wireless router or gateway to clone your existing

wireless network:
1. Press and hold the Security button on the WiFi extender for about 10 seconds, and
then release it. The Wireless LED starts blinking.
2. Press the WPS button on the wireless router or gateway.
When the Wireless LED stops blinking and lights solid green, the cloning is finalized.
You now have two wireless networks with the same settings (SSID and password). When
you are roaming in your house, your wireless device (laptop, tablet, or smartphone)
switches from one network (router or gateway) to the other (WiFi extender), depending
on the signal quality.
Universal WiFi Extender - Powerline Edition (XAVN2001)
Getting Started
15