Table of Contents
Advertisement
[Type some text]
V.
MAINTENANCE
Warning! Make sure the DIGIFRAME is switched off before cleaning it. Never use
a spray or liquid cleaner directly on the frame or on the plastic case.
To clean your DIGIFRAME, you can remove the surround. To do this, press the
lug on the left-hand side of your frame (fig. 18) and pull gently. To replace the
surround, insert the lugs on the right-hand side and press on the lug on the left-
hand side to gently slide the frame into place.
Then clean the screen:
Wipe the screen with the cloth provided to remove dust and other particles.
If the screen is still not clean, use a glass cleaner (ammonia and alcohol free) on
a clean soft cloth.
To clean the plastic casing: use a dry soft cloth
VI.
F.A.Q.
Q: I inserted a memory card into my DIGIFRAME but the frame cannot read
it. What should I do?
A: Make sure that the card format is compatible with the frame. Then make sure
that the card is properly inserted into the appropriate slot. Finally, switch your
DIGIFRAME off, then on again, so that the reader can recognize the card.
Digiframe
Digital photo frame
Non binding document, subject to modification in the event of
misprint(s) – MKG0308
54
Advertisement
Table of Contents
