Using Your Digiframe; Inserting A Card - Telefunken Digiframe 14002 User Manual

[Type some text]
Fig.2
II.

USING YOUR DIGIFRAME

1. Inserting a card

Insert the memory card containing the pictures you want to display into one of
1
the slots provided (fig 2).
Slot 1: for SD, mini SD, MMC, XD, Memory Stick, Memory Stick Pro, Memory
Stick Duo or Memory Stick Pro Duo cards
Slot 2: for Compact Flash or MD cards
DIGIFRAME reads basis JPEG images, that is to say images as taken by digital
2
cameras.
If you use image editing software (Photoshop, Paint Shop Pro,...etc), make sure
you save your work in basic JPEG format only and not in progressive JPEG or
any other JPEG format.
If you want to display black and white pictures on your DIGIFRAME, make sure
they are in RGB mode and not greyscale. If they aren't, you will be able to
display these images as thumbnails but not in full-screen.
DIGIFRAME's screen resolution is 1280 x 800 pixels. You can display images of
a higher resolution but this may slow down the time taken to display the photos.
Digiframe
Digital photo frame
Non binding document, subject to modification in the event of
misprint(s) – MKG0308
10