Troubleshooting
Manual Test Mode
Manual Test Mode Commands
Table 3: Manual Test Commands
Key Sequence
#02#
#03#
#04#
#09#
**0102#
**0105#
*#06#
31
Motorola W230/W388/W216/W231 telephones are equipped with a manual test mode
capability. This allows service personnel to verify functionality and perform fault isolation by
entering keypad commands.
To enter the manual test command mode, a GSM/DCS/PCS test SIM must be used.
1.
Press and hold
2.
Remove the battery as described in the procedures.
3.
Remove the customer's SIM card from the phone as described in the procedures.
4.
Insert the test SIM into the SIM slot.
5.
Replace the battery as described in the procedures.
6.
Press and hold
Test Function/Name
Handset information
RF information
ADC information
Simple Test mode
FFS format
Disable EFEM mode
IMEI number
to turn the phone OFF.
to turn the phone ON.
May 30, 2008
W230/W388/W216/W231
Remarks