HP Z600 Specification page 17

QuickSpecs
System Technical Specifications
Memory Configuration
(Supported)
PCI Express Connectors
PCI Connectors (5.0V)
Supported Drive
Interfaces
Not all memory configurations possible are represented above.
Only ECC DIMMs are supported.
Do not install memory modules into memory slots if corresponding processor is not installed.
Dual processor configurations with memory modules installed for only one processor is not
supported.
UDIMM (Unbuffered) and RDIMM (Registered) memory cannot be mixed. All memory installed in the
system must be either UDIMM or RDIMM.
2 PCI Express x16 Gen2 graphics
1 PCI Express Gen2 (x8 mechanically, x4 electrically)
1 PCI Express Gen1 (x8 mechanically, x4 electrically)
2 full length 33 MHz 32-Bit
SATA
Serial Attached SCSI
Integrated RAID
DA - 13277 North America — Version 51 — November 21, 2013
Integrated 6-channel SATA 3.0Gb/sec controller with RAID 0, 1,
5, 10 and NCQ. (Factory integrated RAID is Microsoft Windows
only)
Requires Optional PCIe card
Integrated SATA RAID
RAID 0, RAID 1*, RAID 5, RAID 10
Supports one RAID array with 2-4 drives
RAID 0 configuration - striped array (supported and
configure to order)
RAID 1 configuration - mirrored array (supported and
configure to order)
RAID 5 parity striping (supported but not configure to
order)
RAID 10 striped and mirrored array (supported but not
HP Z600 Workstation
Page 17