HP ProLiant SL250s Specification page 5

QuickSpecs
Standard Features
HP Server ROM
Storage Controller
Internal Storage Devices Diskette Drives
Maximum Internal
Storage
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to
assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
www.hp.com/support/rbsu.
HP H220i Host Bus Adapter (B320i Dynamic Smart Array with FW update)
Optical Drives
Hard Drives
2U Half Width tray
Hot Plug SAS SFF
Hot Plug SATA SFF
Hot Plug SAS SSD SFF
Hot Plug SATA SSD SFF
Quick Release SAS SFF
Quick Release SATA SFF
Quick Release SSD SAS SFF 1.6TB
NOTE: The Non-Hot Plug Quick Release drives can only be used when implementing the internal SFF kit
and not implementing the GPUs
NOTE: The SL250 SFF Internal Enablement Kit (PN: 679991-B21) allows for up to four SFF HDD to be
implemented in place of the three GPUs.
DA - 14232 North America — Version 29 — December 16, 2013
HP ProLiant SL250s Generation 8 (Gen8)
Via USB through the SUV port, external support only
Via USB through the SUV port, external support only
None ship standard
4.8TB
4.0TB
3.2TB
3.2TB
4.8TB
4.0TB
4 x 1.2TB
4 x 1TB
4 x 800GB
4 x 800GB
4 x 1.2TB
4 x 1TB
4 x 400GB
Page 5