QuickSpecs
Standard Features and Configurable Components (availability may vary by country)
I/O Ports
USB 2.0
USB 24V
Serial
Parallel
eSATA
RS-232
USB+PWR 12V
PS/2
RJ-11
Video
DVI output
Audio
NIC
*These options occupy slot openings so less slots will be available when the options are installed
Serial Ports (Power Configurable in HP Bios) – detail
1 and 2: Powered Configurable serial port expansion card installation that supplies two additional serial ports (COM3 and COM4)
3 and 4: Two Power Configurable serial ports, COM1 and COM 2, are standard on the POS System.
Front: Two (2), covered
Rear: Five (5)
One (1) 24V powered USB
Two (2) RS-232 (power configurable) ports standard
One port available as an
option*
One port available as an
option*
Two (2) RS-232 powered configurable ports optional (for a total of 4*)
Two (2) USB+PWR 12V cards optional (three (3) 12 Volt USB+ PWR per card) for a total of 6*
One (1) color-coded support for keyboard (purple)
One (1) color-coded support for mouse (green)
One (1) RJ-11 Cash Drawer port
One (1) VGA
One (1) DisplayPort v1.1a
Provides integrated dual independent monitor support
Available via optional DisplayPort to DVI Adapter
Rear: Line input (supports microphone or line input) and line out
All ports are 3.5mm in diameter
NOTE: See Audio/Visual section for information on re-taskable audio ports
One (1) Industry standard RJ-45 port accesses the integrated network interface controller
DA - 13982 North America — Version 12 — November 8, 2013
HP rp5800 Retail System
Page 10