Table of Contents
Advertisement
Control Panel
The EC-P8 control panel is an advanced intruder alarm system
with 8 on-board zones and on-board multi format communicator.
The system is ideally suited to domestic and small commercial
installations.
The system can be further enhanced by using the ACM-NX module
which provides both IP and X-10 connectivity. X-10 is a simple
home automation protocol that uses the existing mains wiring to
communicate with X-10 compatible devices via a XM10U
controller. Once the ACM-NX is installed, both the system and X-
10 devices can be controlled remotely using smart phone apps.
A choice of either LCD or LED remote keypads is available. Other
features include:
8 programmable on-board zones
4 programmable outputs (1Amp rated)
On-board communicator/modem
Local or remote upload/download
250 event log
Advanced system diagnostics
1.2 Amp switched mode power supply
Communication port for accessories etc
Loudspeaker output (uses output 4)
Flash upgradable
Remote Keypads
The EC-P8 will accept up to a maximum of 4 remote keypads. All
remote keypads require a 4-wire connection to the control panel
using standard alarm cable. The following remote keypad models
are available:
EC-LED Remote Keypad
The LED keypad features a dual 7 segment display for displaying
zone status and system fault messages. A set of dedicated
system status LEDs for AC, Ready, Armed, Trouble, Bypass, Alert
and Alarm are also provided. Other features include:
4-wire connection using standard alarm cable
Internal sounder
Backlit keyboard
EC-LCD Remote Keypad
The LCD keypad features a 2 x 20 character blue display for
showing all zone status and system fault messages. A set of
dedicated system status LEDs for AC, Trouble and Alert are also
provided. Other features include:
4-wire connection using standard alarm cable
Internal sounder
Backlit keyboard
P0031-LI-02.01
Expansion Modules
The following expansion modules are available:
EC-EX10 Zone & Output Expander
The EC-EX10 is a housed zone and output expansion module that
is connected to the 4-wire control panel network. Features
include:
10 fully programmable zone inputs
10 programmable outputs (8 x 100mA; 2 x 1Amp)
Internal piezo sounder
16Ω loudspeaker connection, with programmable volume
Tamper protection
Engineer keypad port
Stylish housing
EC-EX10/I Zone Expander
The EC-EX10/I is a housed zone expansion module that is
connected to the 4-wire control panel network. Features include:
10 fully programmable zone inputs
Tamper protection
Stylish housing
EC-COM/IP Communication Module
The EC-COM/IP is an IP based communicator and X-10 home
automation interface PCB module. Features include:
Ethernet connection to LAN/WAN
Remote access via Eclipse UDL or smart phone app
Alarm reporting via LAN/WAN to PC based alarm receiver
X-10 port for automating X-10 devices via XM10U/E
controller
X-10 devices controlled via the system or smart phone app
PCB module clips into EC-P8 control panel housing
USB-Link
The USB-Link provides USB connectivity between the EC-P8 and
the host computer. It is required when a direct connection is
required between the Eclipse UDL software package and the
control panel.
Upload/Download Software
This Windows based software can be used to remotely or locally
program and diagnose the Eclipse range of security systems.
Features include:
Simple intuitive user interface
Local or remote via modem and IP
System remote control
Advanced system diagnostics
Multi language support
System audit trail
5
Advertisement
Table of Contents
