Table of Contents
Advertisement
LCD
18
LED
Description
Dr ??
Duress alarm by user ??.
UT ??
User ?? proximity tag access.
UL ??
User ?? has been locked out from using the system.
User ?? proximity tag has been locked out from using
TL ??
the system.
CT ?
Code tamper (invalid code) generated at keypad ?.
ESU ??
Exit mode started by user ??.
EST ??
Exit mode started by control timer ?.
ESC ??
Exit mode started by zone ??.
ES
Exit mode stopped.
EF ??
Exit mode failed by zone ??.
EN ??
Entry mode stared by zone ??.
ET
Entry timeout alarm.
SA
System armed.
SD
System disarmed.
S ?
Stay armed #? (? = 1, 2 or 3).
AF ?
Arming failed.
The system was armed with an Alarm Transmission
AU
System (ATS) fault.
AA
The system was automatically armed.
AD
The system was automatically disarmed.
RA
The system was automatically armed remotely.
RD
The system was automatically disarmed remotely.
SU
The system was powered up.
ACOff
The mains ac supply has been switched off.
ACOn
The mains ac supply has been restored.
BF
Battery fault #? (1: Presence Fail; 2: Load Test Fail).
BR
Battery fault restored.
The system standby battery voltage is low (The system
LB
is running on battery only).
TD
The system time and date has been changed.
ENON
The engineer access code has been entered.
ENOF
The engineer has logged off.
BFAL
The bell fuse has gone open circuit (electronic fuse).
BFAR
The bell fuse has restored.
AFAL
The auxiliary 12V fuse has gone open circuit (electronic
P0031-LU-02.01
Advertisement
Table of Contents
