Table of Contents
Advertisement
Attaching the POWER SUPPLY
Be sure to ask a qualified technician or your dealer.
r To the equipment installer:
Before you begin, make sure to read "Read this first!" (x page 3).
Precautions for attaching and removing the POWER SUPPLY
f Make sure to turn off the power before attaching or removing the unit to/from the Multi Window Processor.
f Do not touch the connecting part of the POWER SUPPLY directly.
g Doing so may result in static electricity that damages components.
f To prevent damage by static electricity, touch a metal object nearby to remove electrostatic charge on your body before you begin.
f Be careful to avoid injury when attaching or removing the POWER SUPPLY.
f Install the POWER SUPPLY to the Multi Window Processor by slowly and securely inserting it horizontally into the connector.
g Incorrect attachment may result in failure to operate or malfunction.
Attaching the POWER SUPPLY
Screw
Fig. 1
1)
Remove the cover for the POWER SUPPLY attachment section. (Fig. 1)
f Use a Phillips-head screwdriver to turn the screw with toothed lock washer (x 1) securing the cover for the POWER SUPPLY
attachment section counterclockwise, and slowly open and remove the cover in the direction of the arrow.
2)
Carefully insert the new POWER SUPPLY to the insertion position. (Fig. 2)
f Make sure that the <POWER> switch of the new POWER SUPPLY is on the <h> side before installing.
f Insert the POWER SUPPLY fully and securely.
3)
Use a Phillips-head screwdriver to securely tighten the POWER SUPPLY fixing screw (x 1). (Fig. 3)
4)
Attach the power cord provided with the POWER SUPPLY to the <AC IN> terminal.
Attention
f The removed screw with toothed lock washer and the cover for the POWER SUPPLY attachment section will be required when removing
the POWER SUPPLY that is no longer needed. Store it for installation at a later date.
Removing the POWER SUPPLY
1)
Press the <POWER> switch of the POWER SUPPLY towards the <h> side to turn off the power.
Attaching the POWER SUPPLY
Fig. 2
POWER SUPPLY fixing screw
Fig. 1
POWER SUPPLY fixing screw
Fig. 3
Handle
ENGLISH - 9
Advertisement
Table of Contents
