Read this first!
To remove the battery
Remote Control Battery
1. Press the guide and pull out
the battery base.
Trademarks
•
Windows
, Windows Vista
®
Corporation in the United States and other countries.
Macintosh, Mac, Mac OS, OS X and Safari are registered trademarks of Apple Inc. in the United States and
•
other countries.
•
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
•
PJLink
is a trademark or pending trademark in Japan, the United States, and other countries and regions.
™
RoomView, Crestron RoomView are registered trademarks of Crestron Electronics, Inc, and Crestron
•
Connected is the trademark of Crestron Electronics, Inc.
•
Other names, company names or product names used in these operating instructions are the trademarks or
registered trademarks of their respective holders.
Please note that the operating instructions do not include the
Illustrations in these operating instructions
•
Note that illustrations of the projector and screens may differ from the ones you actually see.
Page references
•
In these instructions, references to pages are indicated as: (
Term
•
In these instructions, the "Wireless remote control unit" accessory is referred to as the "Remote control".
8
- ENGLISH
, and Internet Explorer
are registered trademarks or trademarks of Microsoft
®
®
2. Remove the battery.
®
and
TM
symbols.
Æ
page 00).