Set Locks And Timers - Philips PFL5xx7H/12 User Manual

Search
You can search for a word or number that
exists on the current text page.
1. While you are viewing text, press OK to
highlight the first word or number.
2. Press the Navigation buttons to skip to
the word or number to search.
3. Press OK to begin the search.
4. To exit the search, press
or number is highlighted.
Digital text
If a digital TV channel's broadcaster offers
dedicated digital text or interactive services,
you can view digital text. Such channels, such
as BBC1, may have digital text with more
interactive features.
Note: Digital text services are blocked when
subtitles are broadcast and switched on.
Read Set up your TV > Language settings >
Subtitles on digital channels (Page 42).
When in digital text:

Press the Navigation buttons to select
or highlight items.

Press the Colour buttons to select an
option, then press OK to confirm or
activate.
Text 2.5
With Text 2.5, you can view text with more
colours and better graphics than normal text.
If Text 2.5 is broadcast by a channel, it is
switched on by default.
To switch Text 2.5 on or off
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Text 2.5] > [On] or [Off], then
press OK.
until no word

Set locks and timers

Clock
You can display a clock on the TV screen.
The clock displays the time that is broadcast
by your TV service operator.
Display the TV clock
1. While you watch TV, press
2. Select [Status], then press OK.
The clock is displayed on the lower right
hand corner of the TV screen.
Change the clock mode
You can change the clock mode to
automatic or manual. By default, it is set to
automatic mode, which synchronises it to
Coordinated Universal Time (UTC). If your
TV cannot receive UTC transmissions,
change the clock mode to [Manual].
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Clock] > [Auto clock mode].
4. Select [Automatic], [Manual] or [Country
dependent], then press OK.
Enable or disable daylight saving time
You can enable or disable daylight saving
time depending on your region. Before you
enable/disable daylight saving time, set the
clock mode to [Country dependent].
1. In the [Clock] menu, select [Daylight
saving] > [Daylight saving time] or
[Standard time], then press OK. Daylight
saving time is enabled or disabled.
Set the clock manually
You can set the date and time manually.
Before you start, set the clock mode to
[Manual].
1. In the [Clock] menu, select [Date] or
[Time], then press OK.
2. Use the Navigation buttons to make
your selection.
3. Select [Done], then press OK.
OPTIONS.
EN 31