Dialing A Caller Id N; Umber - GE 21006 User Manual

1. Use the cid/vol (up or down arrow) button to scroll to the desired
Caller ID record.
2. Press the SAVE soft key to display SELECT MEMORY 01-50.
3. Use the touch tone pad to enter a memory location number (for
example, press 01 to store the record in memory location one). If the
memory location had an existing memory record, you must confirm
replacement by pressing the OK soft key.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the sub-menu.
D C
IALING A ALLER
While reviewing the Caller ID list, you may call the phone number showing
in the display.
1. Make sure the phone is OFF (not in talk mode).
2. Press cid/vol (up or down arrow) button until the desired call record
shows in the display.
Depending on (a) how the incoming caller's phone number is formatted
when it is received, and (b) whether or not you previously pre-
programmed your local area code into the set up menu, you may need to
adjust the format of the incoming caller's stored phone number before
making the call.
Use the format button to edit the format of the displayed telephone number.
Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
30
ID N

UMBER

Explanation
long distance code "1 "
+3-digit area code
+7-digit telephone number.
3-digit area code +
7-digit telephone number.
7-digit telephone number.
Example
1-317-888-8888
317-888-8888
888-8888