Table of Contents
Advertisement
Safety and Security
Occupant safety
Example, second-row seats
2 Anchor
Install a LATCH type child seat accord-
ing to the manufacturer's instructions.
!
Make sure the seat belt for the center seat
can operate freely with a child seat installed.
i
Non-LATCH type child seats may also be
used and can be installed using the vehicle's
seat belt system. Install child seat according to
the manufacturer's instructions.
94
Installation of infant and child restraint
system
This vehicle is equipped with tether
anchorages for a top tether strap at the
second-row seat backrest. For installing an
infant and child restraint system at the
third-row seats, use the cargo tie-down
rings in the cargo compartment
( page 301).
1 Anchorage ring cover
Remove anchorage ring cover 1 from
seat backrest of the seat on which a
child seat is to be installed.
2 Anchorage ring
3 Hook
i
For safety, make sure hook 3 has attached
to anchorage ring 2 beyond the safety catch, as
illustrated.
Move the respective head restraint to
its uppermost position ( page 133).
Hide quick links:
Advertisement
Table of Contents
