Startup Menu - Lenovo ThinkPad Helix User Manual

Table 2. Security menu items (continued)
Menu item
Submenu item
Sensor Hub
Anti-Theft Intel AT Module
Activation
Intel AT Suspend
Computrace Module
Activation
Secure Boot Secure Boot
Platform Mode
Secure Boot Mode
Reset to Setup Mode
Restore Factory Keys

Startup menu

You might need to change the tablet startup settings. To do so, tap Startup from the ThinkPad Setup menu.
Attention:
• After you change your startup sequence, you must be extremely careful not to specify a wrong device
during a copy, a save, or a format operation. If you specify a wrong device, your data and programs
might be erased or overwritten.
Value
Comments
• Disabled If you select Enabled, you can use the sensor
hub.
• Enabled
• Disabled Enable or disable the UEFI BIOS interface to
activate the Intel AT module, which is an optional
• Enabled
Anti-Theft service from Intel.
• Permanently
Note: If you set the Intel AT module activation
Disabled
to Permanently Disabled, you will be unable to
enable this setting again.
• Enter This option is displayed only when the anti-theft
function is activated.
The Intel anti-theft suspend screen will be
displayed at next boot to enter the suspend
mode.
• Disabled
Enables or disables the UEFI BIOS interface to
activate the computrace module. Computrace
• Enabled
is an optional monitoring service from Absolute
• Permanently
Software.
Disabled
Note: If you set the computrace module
activation to Permanently Disabled, you will be
unable to enable this setting again.
• Disabled Enable or disable UEFI Secure Boot feature.
Windows 8 operating system requires this feature
• Enabled
to be enabled.
• User Mode Specify the system operating mode.
• Setup Mode
• Standard Mode Indicates Secure Boot mode is standard mode
or custom mode.
• Custom Mode
• Enter This option is used to clear the current platform
key and put the system into setup mode. You can
install your own platform key and customize the
Secure Boot signature databases in setup mode.
Secure Boot mode will be set to custom mode.
• Enter This option is used to restore all keys and
certificates in Secure Boot databases to factory
defaults. Any customized Secure Boot settings
will be erased, and the default platform key will
be re-established along with the original signature
databases including certificate for Windows 8
operating system.
.
Chapter 6 Advanced configuration
47