Warning; Caution - Lab.gruppen C 20:8X Operation Manual

Important Safety Instructions
1.4

Warning

To reduce risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Français: Pour réduire les risques de blessure ou le choc électrique, n'exposez pas l'appareil à la pluie ou à l'humidité.
Do not expose this system/apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases,
are placed on the apparatus.
Français: L'appareil ne doit pas être exposé à des egouttements d'eau ou des éclaboussures et de plus qu'aucun objet
rempli de liquide tel que des vases ne doit pas être placé sur l'appareil.
This apparatus must be connected to a mains socket outlet with a protective earthing connection.
Français: Cet appareil doi t être raccordé á une prise de courant qui est branchée à la terre.
The mains plug is used as a disconnect device and shall remain readily operable.
Français: Lorsque la prise du réseau d'alimentation est utilisés comme dispositif de déconnexion, ce dispositif doit
demeuré aisément accessible.
1.5

Caution

To reduce the risk of fire or electric shock, do not remove screws. No user-serviceable parts inside. Refer servicing to
qualified service personnel.
Français: Pour réduire le risque d'incendie ou de choc électrique, ne pas retirer les vis. Aucune pièce réparable par
l'utilisateur. Confier l'entretien àpersonnel qualifié.
1.6 FCC Compliance Notice (Radio Interference)
A sample of this product has been tested and complies with the limits for the European Electro Magnetic Compatibility (EMC) directive.
This equipment has also been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference from electrical equipment. This product
uses radio frequency energy and if not used or installed in accordance with these operating instructions, may cause interference to
other equipment, such as radio receivers. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and
off, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Check if the affected unit complies with the EMC limits for immunity, (CE-labeled). If not, address the problem with the manufacturer
or supplier. All electrical products sold in the EC must be approved for immunity against electromagnetic fields, high voltage flashes,
and radio interference.
Consult the dealer or an experienced radio/TV technician for help.
ii
C Series C 20:8X, C 10:8X, C 10:4X and C 5:4X Operation Manual rev. 1.1.4