Barnes & Noble NOOK BNRB1530 User Manual page 21

If your personal computer sleeps or hibernates, it will probably stop charging your
To charge your
hibernate.
We recommend that you turn your
into USB when it is off, your personal computer might have trouble recognizing your
is starting. Your computer should recognize your
The first time you connect your
on. The computer will install USB drivers for your
operation is in progress. It will also display a message when it completes installing drivers.
You can ignore these messages. They do not affect charging.
To charge your
NOOK
1 Power on your personal computer.
2 Plug the smaller end of the USB cable into the USB/charging port on your device.
3 Plug the larger end of the USB cable into a USB port on your computer. The USB cable
connections are shown in the drawing above.
What happens now depends on power state your
:
Off
Your turns on and charges. Do not turn it off again. After it starts, it displays a pop-
NOOK
up message that indicates USB is available.
While your
NOOK
a USB device and fail. When this happens, your computer displays a message about an
unrecognized USB device. You can ignore and dismiss the message.
Sleeping: Your
NOOK
NOOK User Guide
, adjust the settings on your computer so that it does not sleep or
NOOK
on before plugging it into USB. If you plug your
NOOK
NOOK
using USB:
is starting, your computer might try to recognize your
charges and enters USB drive mode.
after your
NOOK NOOK
to a personal computer, your
, and display a message that this
NOOK
Computer / USB
is in:
NOOK
Power and Charging
.
NOOK
NOOK
while it
NOOK
has completed its startup.
should be
NOOK
USB
Cable
as
NOOK
21