Putting The Cxc 700 Into Operation - Sennheiser CXC 700 Instruction Manual

Putting the CXC 700 into operation

LED indications
LED
lights up
flashes
continuously
is off
Putting the CXC 700 into
operation
For powering the NoiseGard active noise
compensation, an AAA size battery is
required. If you are using a recharge-
able battery, the operating time will be
reduced.
When the battery is discharged or not
inserted:
Switch NoiseGard off if you want to
continue listening to your audio
source (see page 13).
When the battery is almost empty,
the LED flashes continuously.
8 | CXC 700
Meaning
NoiseGard is switched on
Battery is almost flat
NoiseGard is switched
off