Putting The Cxc 700 Into Operation; Inserting/Changing The Battery - Sennheiser CXC 700 Instruction Manual

Putting the CXC 700 into operation

Putting the CXC 700 into
operation
For powering the NoiseGard active
noise compensation, an AAA size
battery is required. If you are using a
rechargeable battery, the operating
time will be reduced.
When the battery is discharged or not
inserted:
Switch NoiseGard off if you want to
continue listening to your audio
source (see page Seite 13).
When the battery is almost
empty, the LED flashes continu-
ously.

Inserting/changing the battery

1
Open the battery compartment.
Remove the discharged battery
(where applies).
2
Insert a new battery. Observe
correct polarity when inserting the
battery.
3
Close the battery compartment.
8 | CXC 700