Output parameters to the device
Sector Count
When the automatic power down sequence is enabled, the drive will enter Standby mode automatically if
the time-out interval expires with no drive access from the host. The time-out interval will be reinitialized if
there is a drive access before the time-out interval expires.
Time-out Parameter. If it is zero, the automatic power down sequence is
disabled. If it is non-zero, then the automatic power down sequence is enabled.
The time-out interval is shown below:
Value
-------
0
1-240
241-251
252
253
254
255
Deskstar 60 GXP Hard disk drive specification
Time-out
------------------------
Timer disabled
Value * 5 seconds
(Value-240) * 30 minutes
21 minutes
8 hours
21 minutes 10 seconds
21 minutes 15 seconds
119