7.0 General
7.1 Introduction
This specification describes the host interface to DTNA-xxxxx.
The interface conforms to the Working Document of Information technology - AT Attachment-3 Interface
(ATA-3) Revision 6 dated on October 26, 1995. with certain limitations described in 8.0, " Deviations From
Standard" on page 47.
DTNA-xxxxx supports the following functions included by ATA-3 standard.
Security Mode Feature Set
S.M.A.R.T.(Self-Monitoring, Analysis, and Reporting Technology) Function
DTNA-xxxxx supports the following function as Vendor Specific Function.
Format Unit Function
Protected Area Function
7.2 Terminology
Device
Device indicates DTNA-xxxxx.
Host
Host indicates the system that the device is attached to.
First Command
The command which is executed first right after power on reset or hard reset when
the initial power mode at power on is Standby mode.
Copyright IBM Corp. 1997
45