5.7 Identification
5.7.1 Labels
The following labels are affixed to every disk drive .
1.
A label placed on the top of the HDA containing the statement 'Made by IBM' or equivalent, Part
No., EC No. and F R U No.
2.
A bar code label placed on the disk drive based on user request. The location on the disk drive is to be
designated in the drawing.
3.
Labels containing the vendor's name, disk drive model number, serial number, place of manufacture
and UL/CSA logos.
5.8 Electromagnetic Compatibility
The drive, when installed in a suitable enclosure and exercised with a random accessing routine at maximum
data rate, shall meet the worldwide EMC requirements listed below.
IBM will provide technical support to assist users in complying with the EMC requirements.
United States Federal Communications Commission (FCC) Rules and Regulations (Class B), Part 15.
European Economic Community (EEC) directive number 76/889 related to the control of radio fre-
quency interference and the Verband Deutscher Elektrotechniker (VDE) requirements of Germany
(GOP).
5.8.1 CE Mark
The product is certified for compliance to EC directive 89/336/EEC.
appears on the drive.
30
O E M Specifications of DTNA-2xxxx 2.5 inch H D D
CE marking for the certification