Hitachi HDS721050CLA362 Specifications page 125

Output Parameters To The Device
Sector Number
Cylinder High/Low
H
Input Parameters From The Device
Sector Number
Cylinder High/Low
H
Error
In LBA mode, this command formats a single logical track including the specified LBA.
HITACHI Deskstar & CinemaStar 7K1000.B & Deskstar E7K1000 Hard Disk Drive specification
In LBA mode, this register specifies LBA address bits 0 - 7 to be formatted. (L=1)
The cylinder number of the track to be formatted. (L=0)
In LBA mode, this register specifies LBA address bits 8-15 (Low), 16-23 (High) to be
formatted. (L=1)
The head number of the track to be formatted. (L=0)
In LBA mode, this register specifies LBA address bits 24-27 to be formatted. (L=1)
In LBA mode, this register specifies current LBA address bits 0-7. (L=1)
In LBA mode, this register specifies current LBA address bits 8-15 (Low), 16-23
(High)
In LBA mode, this register specifies current LBA address bits 24-27. (L=1)
The Error Register. An Abort error (ABT=1) will be returned when LBA out of range.
121