Analog Connections; Digital Connections; Connecting The Power Supply Cord - Denon DCD-CX3 Operating Instructions Manual

Analog connections

Digital connections

• Connect either the "COAXIAL " or the "OPTICAL " digital output terminal.
• There is a protective cap covering the optical digital output terminal.
After removing the protective cap, insert the plug firmly until it locks.
• No digital signals are output for Super Audio CDs.
When connecting the optical digital output connector with an optical
n
transmission cable (commercially available)
Protective cap
Match the
shapes
Remove the protective cap, match the shapes,
then insert firmly all the way in.
Stereo receiver
A
L L
R R
CD recorder,
MD recorder, etc.
B
C
• Store the protective cap in a safe place so as
not to lose it, and use it when not using the
terminal.

Connecting the power supply cord

NOTE:
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
• Do not unplug the power supply cord while the set is operating.

ENGLISH
ENGLISH
AC outlet (Wall)
AC 230 V, 50 Hz
Power supply cord
(supplied)