Copying From Dvd To Hdd - Pioneer DVR-560HX-K Operating Instructions Manual

Copying and backup
11
ENTER
10 Select 'Next' to proceed.
Copy HDD DVD (Video mode)
Title Edit
20:00 Wed 29/03 Pr 2 SP
1
2 20:00 Wed 22/03 Pr 2 SP
Copy List Total
Current DVD Remain
There are several options available from the
next screen:
• Select Recording Mode if you want to
change the recording quality (see
Recording Mode on page 105).
• Select Input Disc Name if you want to
change the disc name. Input a name of
up to 64 characters for a VR mode disc or
40 characters for a Video mode disc or
DVD+R/+RW. (The input method is
similar to that of naming titles; see Title
Name on page 93.)
• Select Finalize if you want to
automatically finalize a DVD-R/-RW
(Video mode) or DVD+R after copying.
Select a title menu style from the
following screen.
ENTER
11 Select 'Start Copy' to start
copying.
Copy HDD DVD (Video Mode)
Start Copy
HDD
Copy Time 0h 16m
Recording Mode
Disc Name
Finalize
Copy List Total
Current DVD Remain
• If you're using a DVD-R DL or DVD+R DL
disc and the copy will span both layers,
the Copy List Total bar will be purple.
• The Current DVD Remain bar will be
half-length if the first layer of a DVD-R DL
or DVD+R DL disc is already full.
Note
104
1 If a timer recording is scheduled to start during copying, the disc will not be finalized.
En
2 Title
1 > 2 > 3
20:00 Wed29/03 Pr 2 SP
1h00m(2.0G)
4.3G
4.3G
1 > 2 > 3
DVD-RW
Video Mode Back
Recording Mode
Input Disc Name
High-Speed
Finalize
Off
Start Copy
4.3G
4.3G

Copying from DVD to HDD

Important
• The DVD to HDD Copy screen isn't
accessible when a finalized Video mode
Back
DVD-R/-RW or a DVD-Video is loaded. As
long as the disc is not Copy Guard
Next
protected, you can still use the One
Touch Copy function, however (see One
Touch Copy on page 100).
• The recorder can only store one Copy List
at a time.
• The Copy List will be erased if:
– any of the titles on the DVD disc are
erased or edited.
– the disc tray is opened.
– playback is switched between Play List
and Original.
– the DVD disc is re-initialized.
– Video mode disc is finalized.
– the recorder is reset to its factory
settings (see Resetting the recorder on
page 167).
• It may not be possible to copy from a
DVD disc that was recorded on a
different DVD recorder or a PC.
1
HOME
MENU
1 Display the Home Menu.
Select 'Copy' > 'DVD/CD 
ENTER
2
HDD'.
ENTER
3 Select a Copy List type.
• Selecting Create New Copy List will
erase any Copy List already stored in the
recorder.
ENTER
4 Add titles to the Copy List
(highlight a title and press ENTER to add).
Titles you've added to the Copy List are
highlighted in pink.