Regulatory Domains; Becoming Familiar With The Access Point - Cisco Aironet 1550 Series Getting Started Manual

Regulatory Domains

The 1550 series supports the following regulatory domains (shown as "x" in the model numbers):
• -A FCC/North America, including Canada, Mexico, and some South American countries
• -C China, Indonesia, Malaysia, Egypt
• -E ETSI and many European, Middle Eastern, and African countries (EMEA)
• -K Korea
• -M Kuwait and Saudi Arabia
• -N Non-FCC, including Australia, New Zealand, Hong Kong, India, Brazil, Panama, and
Mexico
• -Q Japan (5.47-5.725GHz channels)
• -R Russia
• -S Singapore
• -T Taiwan
For the latest details and accurate listing of country homologation, refer to "Table 3. 802.11abgn
Mesh Access Points" on the Wireless-LAN-Compliance-Status page at:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80
537b6a.html#wp9005628
5

Becoming Familiar With the Access Point

The following illustrations show identify the access point connections. Before you begin the
installation process, use these illustrations to familiarize yourself with the access point.
Note The illustrations show all available connections for the configuration ordered. Unused
connections are capped to ensure the watertight integrity of the access point. Liquid tight
connectors are provided for all ports, which can be installed prior to or after deploying the
access point.
Figure 1 and Figure 3
AIR-CAP1552E-x-K9, AIR-CAP1552EU-x-K9, and AIR-CAP1552H-x-K9.
show the access point top connectors for AIR-CAP1552EU-x-K9 and AIR-CAP1552CU-x-K9.
Figure 4 and Figure 5
AIR-CAP1552I-x-K9, AIR-CAP1552C-x-K9, and AIR-CAP1552CU-x-K9.
splitter components for models AIR-CAP1552C-x-K9 and AIR-CAP1552CU-x-K9.
access point right side connectors for all models.
shows the access point bottom and side connectors for models
show the access point bottom and side connectors for models
Figure 2 and Figure 6
Figure 7 shows the RF
Figure 8 shows the
9