Using The Zoom - Sanyo Xacti VPC-S3 Instruction Manual

Using the zoom

There are two zoom functions: optical zoom and digital zoom.
1
Point the camera lens at the subject.
2
Press [T] or [W] on the zoom
switch to compose the desired
image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is
pressed, the zoom bar appears
on the LCD monitor.
h When the optical zoom factor is
at maximum, zooming stops
temporarily. When [T] on the
zoom switch is pressed again,
the mode changes to the digital
zoom mode and zooming
continues (if digital zooming is
enabled).
3
Press the shutter release button.
NOTE
i When shooting without the LCD monitor, the digital zoom is not available.
i At the WIDE end, the zoom is resetting; this is not a malfunction.
LCD monitor
When both optical
and digital zoom
are enabled
Optical zoom
Digital zoom (yellow)
When optical zoom
only is enabled
English
Zoom switch
[W]
[T]
Zoom bar
Pointer
36