Screen Settings And Dvr Information; Amask Set; Bpower Loss/Used Time; C Intialization Log - Sanyo DSR-3716PA Manual For Remote Operation

Manual for remote operations using a network connection
Hide thumbs Also See for DSR-3716PA:
Table of Contents

Advertisement

Screen settings and DVR information

A
MASK SET
A grey pattern can be set on a specified channel used to watch
live video or play back images to protect confidentiality and
privacy.
1
2
3
(Example screen for the 16-channel model)
1 MASK (Initial setting: OFF)
To choose mask settings.
Choosing "ON" allows you to set a grey pattern on each
of the channels of the main monitor, monitor 2 and
network.
2 TIME PERIOD (Initial setting: T-1)
It allows you to set time periods.
Selections: T-1, T-2, T-3, T-4
The parentheses of "T-1 - T-4" show the time periods that
were preset using TIME PERIOD SET of the DVR.
3 Setting the mask portion for each monitor (Initial
setting: OFF)
You can set the grey pattern for each channel of each of
these 3 monitors.
• MAIN MONITOR represents the screen of the main
monitor connected to the DVR.
• MON. 2 represents the screen of the spot monitor
connected to the DVR.
• NETWORK represents the main screen of the
computer used for network operations.
NETWORK mask settings can only be programed
by ID1 users. ID2 and ID3 users can watch the
images on all channels.
English
B
POWER LOSS/USED TIME
Displays the information concerning power loss/used time
and firmware version information.
1
2
3
1 POWER
The number of power failure and the four most recent
power failure records (Date and time of failure/recovery)
are displayed.
2 USED TIME
The used time of each disk (DISK1 USE, DISK2 USE)
and the total amount of electricity time (POWER) are
displayed.
3 FIRMWARE
Displays the firmware version of the firmware currently
mounted on the DVR.
C
INITIALIZATION LOG
The eight most recent occurrences among the initializing
and recording restart records of the DVR's hard disk are
displayed.
1
2
1 DATE/TIME: Displays the date and time of the operation.
2 AREA: Displays the recording area for the operation.
The messages "INITIALIZED", if the computer
was initialized and "AREA RESET" if the
recording area became full and recording was
restarted, are displayed in parentheses next to
the recording area.
35
(User level: ID3)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsr-3706pa

Table of Contents