Network Configuration Menu - Cisco 7945G Administration Manual

Network Configuration Menu

Table 4-2 Network Configuration Menu Options (continued)
Option Description
Domain Name Name of the Domain Name System (DNS) domain in which the
phone resides.
Operational VLAN Auxiliary Virtual Local Area Network (VLAN) configured on a
ID Cisco Catalyst switch in which the phone is a member.
If the phone has not received an auxiliary VLAN, this option
indicates the Administrative VLAN.
If neither the auxiliary VLAN nor the Administrative VLAN are
configured, this option is blank.
Admin. VLAN ID Auxiliary VLAN in which the phone is a member.
Used only if the phone does not receive an auxiliary VLAN from
the switch; otherwise it is ignored.
SW Port Speed and duplex of the network port (labeled 10/100/1000 SW).
Configuration Valid values:
•
•
•
•
•
•
If the phone is connected to a switch, configure the port on the
switch to the same speed/duplex as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you should change the PC
Port Configuration option to the same setting. This ensures that the
PC receives the full benefits of the network operating speed.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-6
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Unlock network configuration
1.
options.
Set the DHCP option to No.
2.
Scroll to the Domain Name
3.
option, press the Edit softkey,
and then enter a new domain
name.
Press the Validate softkey and
4.
then press the Save softkey.
The phone obtains its Operational
VLAN ID via Cisco Discovery
Protocol (CDP) from the switch to
which the phone is attached. To
assign a VLAN ID manually, use
the Admin VLAN ID option.
Unlock network configuration
1.
options.
Scroll to the Admin. VLAN ID
2.
option, press the Edit softkey,
and then enter a new Admin
VLAN setting.
Press the Validate softkey and
3.
then press the Save softkey.
Unlock network configuration
1.
options.
Scroll to the SW Port
2.
Configuration option and then
press the Edit softkey.
3. Scroll to the setting that you
want and then press the Select
softkey.
Press the Save softkey.
4.
OL-17755-01