Chapter 2: Installing Your Phone; Before You Begin - Cisco SPA525G User Manual

Installing Your Phone

Before You Begin

!
CAUTION
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide
This chapter describes how to install and connect your IP phone. It contains the
following sections:
• Before You Begin, page 21
• Connecting the Handset, page 22
• (Optional) Attaching the Desk Stand, page 24
• (Optional) Mounting the Phone to the Wall, page 24
• Connecting Your Phone Power, page 25
• Connecting Your Phone to the Network, page 25
• Verifying Phone Startup, page 33
• Updating Your Phone Firmware, page 33
Before you install and connect your phone, verify with your phone system
administrator (if applicable) that the network is ready for the phone, read the
safety notices, and make sure you have all the phone parts and documentation
available.
Do not plug a telephone line cord into the port marked AUX. The RJ-11 port marked
AUX is reserved for connection with the Cisco Attendant Console. It is not for use
as a telephone line port or IP device connection.
2
21