Using Disc Back-Up - Pioneer DVR-5100H Operating Instructions Manual

Copying and back-up

Using disc back-up*

This feature offers a simple way to make a back-up copy
of a finalized Video mode disc. The data is copied first to
the hard disk drive, then on to another recordable DVD
disc.
* See also Copyright on page 63.
1 Press HOME MENU.
2 Select 'Copy'
3 Select 'Disc Back-up'.
4 Select a back-up option.
Disc Back-up
Start new disc back-up
Resume writing data
Erase back-up data
There are three back-up options:
• Start new disc back-up – Start making a back-up of
a disc.
• Resume writing data – Record the back-up data
already on the HDD to a recordable DVD.
• Erase back-up data – Erase the back-up data on the
HDD.
5 Press OPEN/CLOSE to open the disc tray and
load the disc you want to make a back-up of, then
close the disc tray.
You can only make back-up copies of finalized Video
mode discs.
Disc Back-up
No Disc.
Please load a disc to be backed-up.
Start
6 Select 'Start'.
Disc Back-up
Read from disc and save to HDD.
Start reading?
Start
• To see the progress of the back-up, press DISPLAY.
• You can cancel the back-up process by pressing ONE
TOUCH COPY for more than 1 second.
Cancel
Cancel
7 When the data has been copied, press
CLOSE to open the disc tray. Take out the disc and
load a blank recordable DVD.
Disc Back-up
Disc content saved to Hard Disk Drive.
Please eject the disc and load a
recordable disc.
Start
The table below shows the discs you can use for back-up
when the source disc is DVD-R and DVD-RW:
back-up
DVD-R
DVD-R
DVD-RW
*1
Ver. 2.0 for General DVD-R disc
*2
Ver. 1.1 DVD-RW disc
• Note that the actual recordable capacity of discs vary.
8 Select 'Start' to start writing the backed-up data
to the blank disc.
Disc Back-up
Write back-up data from Hard Disk Drive.
The disc contents will be overwritten.
OK to start?
Start
• To see the progress of the back-up, press DISPLAY.
• You can cancel the back-up process by pressing ONE
TOUCH COPY for more than 1 second. However, this
will make the disc unusable (although if you are
using a DVD-RW disc you can re-initialize it in order
to make it usable again—see Initializing a DVD-RW
disc on page 61.)
9 After the recorder has finished recording the
back-up disc, you can select whether to make
another back-up of the same data or exit.
Disc Back-up
Disc back-up finished.
To make another back-up copy, please load
a recordable disc.
Start
• Select Start to make another back-up copy or Cancel
to finish. If you want to make another back-up copy,
return to step 6 above.
OPEN/
Cancel
*1 *2
DVD-RW
Cancel
Cancel
07
73
En