Océ | Control Panel
•
ERROR - Indicates a printer problem has occurred.
•
MEDIA LOW - Indicates that media supply is below 50 feet.
•
ONLINE - Indicates four status conditions:
- Solid, ready to receive a print job or keypad input
- Slow blink, printing
- Fast blink, receiving a print job
- Off, offline
Navigating from the Main Menu
0.2
Four main control panel submenus control specific functions on the printer: Copies/
Reprints, Operator, Ink Menu, and Configure I/O.
The entire menu structure can be printed using the Print Menu Tree function (see "Print
Menu Tree" on page 4-13).
Copies/Reprints
0.3
This menu (see "Copies/Reprints Menu" on page A-2) controls the number of copies and
specifies the spacing between copies made during each print job. You can also reprint copies
of a previous printed image. An on-board hard drive enables multiple images to be saved
and accessed through the control panel without reprocessing and resending the print from
the processing workstation.
Reprint Copies of a Previously Printed Image
0.3.1
Copies of a previously printed image can be reprinted using the following steps:
1.
Navigate to:
MAIN MENU
copies/reprints
2.
Press the ACCEPT button. You then see:
REPRINTS: [ 0 ] filename
speed, overlap, dir, res x res, width x length
Use the +/- buttons to select a previously printed image.
3.
Press ACCEPT. You then see:
REPRINTS
position: (right, center, or left)
Use the +/- buttons to select the required position.
4-4