Table of Contents
Advertisement
VIDEOJET decoder 3000
2
Short information
2.1
About this manual
This manual is intended for persons responsible for the installation and operation of a
VIDEOJET decoder 3000 unit. International, national and any regional electrical engineering
regulations must be followed at all times. Relevant knowledge of network technology is
required. The manual describes the installation of the unit.
2.2
Conventions in this manual
In this manual, the following symbols and notations are used to draw attention to special
situations:
Caution!
This symbol indicates that failure to follow the safety instructions described may endanger
!
persons and cause damage to the unit or other equipment.
It is associated with immediate, direct hazards.
Notice!
This symbol refers to features and indicates tips and information for easier, more convenient
use of the unit.
2.3
Intended use
VIDEOJET decoder 3000 receives and decodes video signals over data networks (Ethernet
LAN, Internet). The unit is intended for use with CCTV systems. Various functions can be
triggered automatically by incorporating external alarm sensors. Other applications are not
permitted.
In the event of questions concerning the use of the unit which are not answered in this
manual, please contact your sales partner or:
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
www.boschsecurity.com
2.4
EU Directives
VIDEOJET decoder 3000 complies with the requirements of EU Directives 89/336
(Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive).
2.5
Rating plate
For exact identification, the model name and serial number are inscribed on the bottom of the
housing. Please make a note of this information before installation, if necessary, so as to have
it to hand in case of questions or when ordering spare parts.
Bosch Sicherheitssysteme GmbH
Installation Manual
Short information | en
7
2013.08 | V3 | F.01U.281.923
Hide quick links:
Advertisement
Table of Contents
