Specifications - Panasonic BL-PA100KT Operating Instructions Manual

Hd-plc ethernet adaptor starter pack power line communication
Hide thumbs Also See for BL-PA100KT:
Table of Contents

Advertisement

Useful Information

Specifications

All specifications are subject to change without notice.
Power Line Communication interface
Standard
Actual transmission
*1
speed
Maximum recommended
no. of adaptors per
*3
network
Maximum recommended
no. of devices connected to
*4
each adaptor
*1 Results may vary depending on electrical conditions, network environment, and other
factors. For information on how transmission speed is measured, access the Panasonic
PLC Support Site at: http://panasonic.co.jp/pcc/products/en/plc/
*2 Using Linux FTP.
*3 Performance may be affected as more adaptors are added to the network.
*4 Connecting more network devices to an adaptor may increase network traffic and affect
performance.
LAN interface
Standard
Interface
Protocol
Access method
User interface
Indicators
Other
18
HD-PLC
UDP: Max. 70 Mbps
*2
TCP
: Max. 42 Mbps
16 (including the master)
8
IEEE 802.3/IEEE 802.3u
10 Base-T
100 Base-TX
Auto MDI/MDI-X
IPv4, IPv6, TCP, UDP
CSMA/CD
PLC (blue, red)
LAN (green, orange)
MASTER (green)
Mode Selector (MASTER or TERMINAL switch)
SETUP button
FACTORY DEFAULT RESET button

Advertisement

Table of Contents
loading

Table of Contents