Table of Contents
Advertisement
Understanding the indicators
PLC
LAN
MASTER
Blue, lit
The adaptor is successfully connected to the
HD-PLC network.
Blue, flashing
The terminal is being registered to the master.
Blue, flashes
The adaptor is registered to the master, but it is
once every 5
not connected to the HD-PLC network.
seconds
Blue, turns off
The master has detected another master
once every 10
adaptor. In this situation, performance will be
seconds
affected by the presence of the other master
adaptor.
Red, lit for 5
There was an error during registration. Try again.
seconds
Red, lit
The adaptor is not functioning properly and
cannot communicate over the HD-PLC network.
Contact an authorised Panasonic service centre.
Off
The adaptor is not plugged in.
The adaptor is not connected to the HD-PLC
network (no other adaptors found, not configured,
etc.).
Green, lit
A LAN cable is connected to the adaptor.
Green, flashing Data is being sent/received.
Orange, lit
There is no network device connected to the
adaptor via the LAN cable, or the network device
is not turned on.
Off
The adaptor is not plugged in.
Green, lit
The adaptor is configured as the master.
Green, flashes
A terminal has been successfully registered to
for 10 seconds
the master.
Off
The adaptor is not configured as the master.
Useful Information
13
Advertisement
Table of Contents
