Panasonic SC-HT80 Operating Instructions Manual page 3

Timer function .................................................................. 39
Setting the timer ......................................................................... .39
Convenient functions ..................................................... .40
To mute the volume .................................................................. .A0
To turn off the units display ....................................................... .40
To listen through headphones ................................................... .40
Adjusting the bass ..................................................................... A#
Using other equipment.................................................... 40
Listening to an external source ................................................. .40
Recording to other equipment ................................................... .40
Using the remote control with other equipment ..........4 1
Operating a television ............................................................... .41
Operating a video deck ............................................................. .41
Initial settings .................................................................. 42
Glossary .......................................................................... 48
Concerning discs ............................................................ 49
When moving the unit .................................................... 49
Troubleshooting Guide ..................................................
Specifications .................................................. Back cover
Maintenance...................................................... Back cover
Disc symbols used in these operating
instructions
The functions you can use depend on the type of disc you play.
These marks are used to indicate which type of disc is explained.
Feature can be used with DVD
Feature can be used with video CD
Feature can be used with audio CD
Some features cannot be used even if these
symbols are indicated.
Set the system up on an even surface away from direct sunlight,
high temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit's service life.
Place it at least 15 cm away from wall surfaces to avoid distortion
and unwanted acoustical effects.
Do not place heavy items on the unit.
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
Ensure the AC mains lead is connected correctly and not damaged.
5 0
Poor connection and lead damage can cause fire or electric shock.
Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is
not covered in these instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorized service center.
Electric shock or damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.