Table of Contents
Advertisement
Chapter 2 Hardware Description and Connection
2.3.3 Mounting the Switch on a Rack
Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining
1
up the two screw holes on the bracket with the screw holes on the side of the rack.
Figure 11 Mounting the Switch on a Rack (ES1100-8P/16/16P/24E)
Figure 12 Mounting the Switch on a Rack (ES1100-24/24G)
Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes
2
into the rack.
Repeat steps
3
16
1
and
2
to attach the second mounting bracket on the other side of the rack.
ES1100 Series User's Guide
Advertisement
Table of Contents
